Artikel | Flächengewicht (gr / qm) | Bindungsart | Faser | Standardbreite mm | Dicke (mm) ** | Harzverträglichkeit *** | Produktblatt |
---|---|---|---|---|---|---|---|
NW P45 | 45 | TNT - Vliesstoff Spunlance | Polyester | 1000-1500 | 0,41 | Epoxy | Produktblatt |
NW P200 | 200 | TNT - Vliesstoff Spunlance | Polyester | 1250 | 0.48 * | Epoxy | Produktblatt |
GG 100 NW 127 TEND | 100 | Vliesnadel | 100% Kohlefaser | 1270 | 2.60 | Epoxy | Produktblatt |
GG 150 NW 127 TEND | 150 | Vliesnadel | 100% Kohlefaser | 1270 | 4.5 | Epoxy | Produktblatt |
GG 200 NW 127 TEND | 200 | Vliesnadel | 100% Kohlefaser | 1270 | 5 | Epoxy | Produktblatt |
GG 300 NW 127 TEND | 300 | Vliesnadel | 100% Kohlefaser | 1270 | 5.5 | Epoxy | Produktblatt |
GG 300 NW 127 TE STC | 300 | Nicht gewebt genäht | 100% Kohlefaser | 1270 | 2.1 | Epoxy | Produktblatt |
GZ 200 NW 127 TEND | 200 | Vliesnadel | 88% Kohlefaser / 8% PET / 4% Glasfaser | 1270 | 4.6 | Epoxy | Produktblatt |
GZ 200 NW 127 TE STC | 200 | Nicht gewebt genäht | 85% Kohlefaser / 11% PET / 4% Glasfaser | 1270 | 2 | Epoxy | Produktblatt |
GZ 300 NW 127 TEND | 300 | Vliesnadel | 88% Kohlefaser / 8% PET / 4% Glasfaser | 1270 | 6 | Epoxy | Produktblatt |
GZ 300 NW 127 TE STC | 300 | Nicht gewebt genäht | 85% Kohlefaser / 11% PET / 4% Glasfaser | 1270 | 2.8 | Epoxy | Produktblatt |
GG 200 NW 127 TE PA6 ND | 200 | Vliesnadel | 60% Polyammide6 (PA6) - 40% Kohlefaser | 1270 | Tpy | Produktblatt | |
GH 200 NW 127 TE PP ND | 200 | Vliesnadel | 60% Polypropylen (PP) - 40% Kohlefaser | 1270 | Tpy | Produktblatt | |
GH 200 NW 127 TE PPS STC | 213 | Nicht gewebt genäht | 20% Kohlefaser - 80% PPS [Poly (p-phenylensulfid) | 1270 | 2.4 | Tpy | Produktblatt |
GH 300 NW 127 TE PA6 ND | 300 | Vliesnadel | 60% Polyammide6 (PA6) - 40% Kohlefaser | 1270 | Tpy | Produktblatt | |
GH 300 NW 127 TE PP ND | 300 | Vliesnadel | 60% Polypropylen (PP) - 40% Kohlefaser | 1270 | Tpy | Produktblatt |
* Fadendichte Toleranz / cm ± 3%
** Die Dickenangabe ist ungefähr und hängt vom Harzgehalt im Laminat ab
*** Die Kompatibilität mit anderen Matrizen muss von unserer technischen Abteilung überprüft und genehmigt werden